Car A C Hose Lock Machine Hydraulic Steering Hose Crimping Machine

Car A C Hose Lock Machine Hydraulic Steering Hose Crimping Machine

Item description:

Design JCPT CNC hose crimping device has outfitted with computer numerical management method, fast crimp and good top quality. This device features large crimp accuracy, large drive, low sounds and effortless to function. It tends to make the mould base division to be a lot more even via the double inclined airplane eight-flap mould seat equipped with a higher accuracy guiding unit. JCPT CNC hose crimping device is primarily employed for crimping processing for high strain hydraulic hose assembly in the mechanical engineering. It can also be employed for crimping steel pipes, specifically big pipes and irregular condition pipes.This machine characteristics small and moveable visual appeal, large drive, reduced sound and simple to operate. The buckling quantity can be precise altered via a scale. It makes the mould base division to be far more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.

Set up and Procedure
one. Include sufficiently 70 liters of Great Wall brand name 46# anti-abrasion hydraulic oil. If the space temperature is reduced than 10ºC, ten% transformer oil is want to add.
Join the electric supply effectively as for every the machine specifications, to make the direction of the motor rotation to be regular with the rotation direction marking, and grounding defense shall be done.
two. Regulating the scale
The scale is utilized for regulating the sum of the buckling. When it is controlled clockwise, the buckling sum will decrease, when it is regulated anticlockwise, the buckling amount will boost. The scale is connected jointly with oil cylinder finish cover by means of a few socket head screws and 3 springs on the scale foundation. When employing a hand to pull the scale (vertical to the oil cylinder end cover route), the scale can flexibly depart from the oil cylinder stop go over. When releasing the scale, the scale will be recovered JCPTing on spring power. Ahead of the device is turned on, inspect very carefully if the scale telescoping is versatile and if the guide relationship is trustworthy.
three. The main scale is turned inside of line of the secondary scale, change the equipment on for examination operate, and notice if all steps are regular. If when the piston conducts reciprocating motion, there is a crawling phenomenon, the bleed screw on the oil cylinder top shall be unscrewed for exhausting air.
four. Force regulation
The buckling force and opening mould pressure will be regulated through two knobs at the back again of the oil cylinder (see determine), when it is regulated clockwise, the pressure will enhance, when it is controlled anticlockwise, the pressure will lower (The pressure has currently been well controlled when ex-factory).
5. Operation 
Dependent on the dimension of the rubber hose to be buckled, choose ideal mould as for every the complex parameter reference table of the locking pipe and mount it on the mould base. Regulated effectively the scale place as per the information in the info in the desk, the pipe locking can be carried out. Right after pipe locking, use a vernier caliper to mease the outside diameter dimension of the pipe sleeve soon after buckling to see if it satisfies the reference table data of the parameter. If it does not satisfy the data, the scale shall be specifically regulated right up until it satisfies the needs. Due to the fact the manufactures of the pipe sleeve are diverse, so, distinct dimension, materials, hardness etc are definitely not the very same. These factors would result diverse influences on the pipe locking result, consequently, the knowledge in the table is only for reference, the in depth info get the strain test as the basis.

 Notices

  1. When buckling, make the joint to identify the mould center as significantly as achievable, the joint is not buckled on the hex nut.
  2. Avert tool and other international matter from entering the locking head.
  3. Following the function is concluded for each time, the 8-block mould foundation must be made to extend to the greatest extent, this can make the spring to be at extension position. If not, the spring will be damage.
  4. When doing work, the hand should not stretch into the locking head.
  5. The power offer should be switched off when servicing is accomplished.

Routine maintenance

  1. We will supply a assure to keep the device in great fix inside of 3 several years from the working day when the equipment is purchased. All fitting problems will be free of cost fixed (or replaced if required) for the duration of the guarantee period. The injury resulted from improper use o accident injury does not belong to cost-free of charge restore range.
  2. The hydraulic oil in the oil tank need to be often checked, if oil volume is located to be insufficient, the oil shall be timely supplemented. If the oil liquid is polluted, it shall be filtered or changed.
    The locking head shall keep interior cleanliness. Stay away from the international matters throughout processing to enter into the locking head oil cylinder by way of the mould to have an effect on the standard use. Wipe out the foreign matters, which are introduced by the mould physique in time when buckling the joint.
    Regularly fill appropriate grease into the mould entire body for lubrication.

Promise
We will provide a ensure to maintain the machine in great fix within three years from the working day when the machine is bought. All fitting troubles will be cost-free of charge fixed (or replaced if required) during the promise period. The harm resulted from inappropriate use o incident damage does not belong to free of charge of demand mend assortment.

Troubleshooting

Trouble phenomena Difficulty cause Getting rid of approach
Equipment has not action Oil tank has not been loaded with oil Fill oil as per requirement
Motor rotation course is not correct Control two section traces
Electrical trouble Overhaul electrical circuits
Scale is ruined The scale is mounted on the oil cylinder conclude confront by the screw Regulate the scale as per the instruction to make scale to telescope freely
Conductor at scale area is connected with scale Anew connect the scale conductor to make it to be insulated from scale foundation
Electric difficulty Overhaul electric powered circuits and electric factors
Scale conductor reducing Anew join scale
System stress is excessively minimal Alter buckling force-regulating valve
No buckling The valve core of solenoid reversal valve is seizured by foreign matters Dismount solenoid reversal valve, use gasoline to cleanse the valve core.
Electric difficulty Overhaul electrical circuits
Mould is not opened Opening mould strain is excessively reduced Adjust opening mould stress regulating valve
Electrical trouble Overhaul electric circuits
Massive noise Set up is not steady Carry out horizontal secure set up
JCPT oil is excessively dirty Filter or adjust it
Filter is blocked Use gasoline to clean the filter
Mould base crawls Gasoline in the hydraulic oil has not bee exhausted fully Suited unscrew the bleed screw, make the piston in the oil cylinder to go again to final situation to exhaust gasoline, then screw down bleed screw.
Lubrication is poor Smear grease on the functioning inclined experience of mould base
Oil leakage Joint is not tightened carefully Tighten the oil pipe joint
Sealing washer is broken. Substitute sealing washer.

Our services:

Pre-Sales Support

* Inquiry and consulting help.
* Sample testing assist.
* See our Manufacturing unit & Place of work.
 

Right after-Sales Services

* Warranty for 3 years.
* Education how to instal and use the machine.
* Supply free of charge swift-use component.
 
Payment Term:

Trade Assurance

* Spend to our firm’s USD bank transfer BY T/T.
* 100% item quality protection 100% on-time cargo protection 100% payment security.

T/T

* one hundred% T/T in progress(regular versions in stock).
* 50% T/T in advance, JCPT paid out before supply(for the JCPTized designs).

Our manufacturing facility also have accept the payment by western union,paypal and funds gram.

FAQ:
one.Issue:Are you manufacturer or investing firm?
Response:We are manufacturer since 1997.

2.Query:Certificates ?
Solution:CE,ISO

three.Question:Shipping time?
Solution:The machines arein inventory now,can be shipped as you require.

four.Issue:What is theMOQ?
Solution:one set for you check.

five.Issue:Can I get some price reduction ?
Indeed, buddy.The a lot more you acquire, the far more you save.

six.Concern:What is the payment?
Reply:T/T in advance,as most of our crimping equipment product are in inventory.
L/C,western union,paypal and cash gram also can be recognized.

7.Query:Can you make JCPTized types or Symbol?
Of program, we are professional OEM company.

8.Issue:Can I check out your manufacturing unit?
Yes,you are warmly welcome to visit our manufacturing facility at any time. Just before the browsing, remember to speak to us to begin with and validate the checking out time, our car can pick up you to our manufacturing facility.
 

Why decide on JCPT FJCPTORY?

one.Large Quality CE UL ISO approved JCPT hose crimping device.

two.Fantastic Affordable handbook hose crimping device,Greatest Quality you ever have.

3.Samway make the hose crimping machine up to 800mm diameter hose with 2500 ton pressing power.

4.Rapidly supply, our factory can dispatch the machine within 24 hours once obtain the payment and guarantee to ship nomally 7 functioning days on board.

Discounts available with bulk purchase

Braided hose crimper JCPT Up to 2” 6SP R15 JCPT Hose Compact in Dimensions Affordable Fantastic Device

220V 240V one phase  fifty/60hz, 380V/400v/415v/440v 3 period equipment have stock.

A wonderful economical braided hose crimper will crimp up to two” 4SP/4SH hydraulic hose,the equipment is equiped with most current technological innovation,Motor from SIEMENS company control method from SIEMENS,Rexroth hydraulic valves,NOK seal make the device druable.

Finn electricity collection braided hose crimper are mostly for services and small manufacturing purpose,economical and compact in layout,best for most of your needs in hose assembly.

Primary consumers:RYCO,PIRTEK,PARKER United states of america,CATERPILAR etc.

OEM service:Our manufacturing unit hydraulic hose crimping device for sale up to thirty”,crimping range up to 1000mm available,5000 ton crimping pressure.

Warranty:Our manufacturing facility hose crimping device provide 3 many years guarantee from date of purchasing.

Car A C Hose Lock Machine Hydraulic Steering Hose Crimping Machine

Tags: