Stainless Steel Jic Tube Fittings Bulkhead Lock Nut Fittings

Stainless Steel Jic Tube Fittings Bulkhead Lock Nut Fittings

Sizzling Products          

Goods Description     

QC JCPTs JIC or AN Fittings Have a 37 diploma flare to make a metallic to metal seal. They are an incredibly widespread thread in the hydraulic entire world.

JIC (or Joint JCPT Council) fittings, defined by SAE J514, are compression fittings machined with a 37 degree flare seating floor and parallel threads. They are typically manufactured in nickel alloys, brass, carbon & stainless steel.

JIC Fitting hydraulic connections are typical in most fluid power methods. The two male and feminine elements have 37 degree seats. The seal is created by establishing speak to amongst the male flared and the feminine coned seat. This is regarded as a mechanical link. There are a few components that make a tubing assembly fitting, flare nut and sleeve.

Specialized Support      

Part No. T
(UNF/UN- 2B)
0306-two LN 5/16-24 5.sixty 9/sixteen
0306-3 LN three/8-24 5.sixty five/8
0306-4 LN seven/16-twenty 6.forty eleven/16
0306-five LN one/two-20 seven.10 3/four
0306-six LN 9/sixteen-eighteen 6.90 13/16
0306-eight LN 3/4-16 7.ninety 1
0306-ten LN seven/eight-14 9.ten 1-one/eight
0306-twelve LN 1 one/16-12 ten.40 one-three/8
0306-14 LN 1 3/sixteen-twelve 10.40 1-one/two
0306-16 LN 1 five/16-twelve ten.forty one-5/8
0306-twenty LN 1 five/eight-12 10.forty 1-seven/eight
0306-24 LN 1 seven/eight-12 10.40 two-1/eight
0306-32 LN two 1/2-twelve ten.forty 2-3/4

Related Products        

Production Process    

Packaging & Shipping                     

1. Male or female fittings covered by plastic caps & plugs.
two. Several fittings packed in a tiny plastic bag to avoid any scratches in the course of transportation.
3. Packed in carton box with label.
four. Carton packing containers put on a normal export plywood pallet with belt fasten.
five. QC Hydrualic can set up delivery by Air or Ocean which as for every JCPTer’s ask for.


QC JCPTs has been granted ISO 9001:2015 & SGS certificates for processing stainless steel hydraulic hose fittings and adapters.


QC JCPTs attends trade fairs 2-three moments every single 12 months. Such as Hannover Messe 2019 …

Company Profile        

HangJCPT QC JCPTs Co., Ltd was started in 1999, and is an ISO 9001:2015 accredited producer of stainless metal hydraulic hose fittings & adapters.

In excess of the many years, QC JCPTs has developed into a foremost company of stainless steel hydraulic fittings in the entire world. More than 95% hydraulic fittings exported to other international locations & areas in the globe.

QC JCPTs is an approved provider to many of the biggest manufacturers of hydraulic fittings in the North The usa and Europe, and assisting a lot of of wholesalers & distributors develop lots of business of stainless steel hydraulic fittings in the world.

Why Select Us?       

1. Heritage:
QC JCPTs was discovered 1999, with twenty several years machining experience, areas are made meeting ISO 9001 good quality expectations and conform to SAE, BS, ISO and DIN norms

2. Quality Management of Raw Components:
one) We only choose the maximum good quality stainless metal uncooked materials. And metal suppliers give substance examination certificates for each and every cargo.
two) We 100% measure the dimensions of bar inventory and forging blanks by callipers for every single shipment.
three) We use the Transportable XRF Analyser to examination the essential chemical factors of bar stock and forging blanks with ten% for each and every cargo(Essential chemical factors incorporate Cr, Ni, Mo, these chemical aspects are very important for the corrosion efficiency).
four) Besides, we randomly pick up several of cutting parts to do more chemical examination by spectrograph every 10 times to make sure the raw content a hundred% certified.

three. Quality Control of Manufacturing Procedure:
1) We are using Sigma substantial-precision CNC lathe machines to procedure stainless steel hydraulic hose fittings and adapters.
Function: Dual-axis, Mitsubishi program
Thread chopping equipment: Mitsubishi Japan, vargus & carmex Israel(Have a quite stable functionality during machining)
2) We use  callipers to evaluate the fundamental sizes. And we use  the thread gages to examine the threads.
3) We use Contracer & Contour Measuring Machines to examine the very small angles and diameters.

four. Inspection:
First Write-up Inspection In the course of Approach
1) The operator make the first write-up according to production drawings.
two) The operator will inspect the 1st article and document. If the sizes and threads fulfill the manufacturing drawings, and then the 1st post will be put in a special box (the box is for 1st report only).
3) Workshop foreman will get next inspection for the very first article.
four) Only passing the inspection by workshop foreman, and then begin with mass creation.

Mass Production Right after Very first Report Inspection
1) After the initial write-up accredited by operator and workshop foreman, and then commence with mass creation.
two) During mass production, the operator requirements to inspect the threads every ten pieces, and evaluate the dimensions each 15 items. As soon as any fittings of threads and dimensions out of the specs, all this batch of fittings will be inspected completely.
3) The qualified fittings will be fitly put in a plastic box piece by piece.
four) Finally, the concluded fittings will be transported to inspection department for final inspection.

Closing Inspection
1) Appearance: a hundred% inspection underneath robust gentle. No scratch, No burr.
2) Key dimensions and angles: fifteen-20% randomly inspection by callipers and contracer. When any dimensions and angles of fittings out of specs or doesn’t respect to drawings, this batch of fittings will be pressured to return again to creation workshop to increase or make a new alternative.
3) Threads: 15-twenty% randomly inspection by proper gages. As soon as any threads out of specs or will not regard to drawings, this batch of fittings will be pressured to return back to manufacturing workshop to increase or make a new alternative.

five. Following Provider:
When clients have any grievances about our items,  we will get a quick motion.
We can 100% make a new substitution for totally free when the consumer has a grievance about our goods.


Q: Are you investing company or producer?
A: We are a 100% manufacturer, principal merchandise protect stainless metal hydraulic hose fittings and stainless metal hydraulic adapters.

Q: Do you have stock?
A: Currently we made to get, but we do have some shares for typical variety uncooked supplies. So we can make a rapid action for some urgent orders.

Q: Do you have a MOQ ask for?
A: Normally our MOQ is two hundred pieces. But for some even bigger sizes, fifty or a hundred items is also acceptable for the very first order.

Q: How about your payment approach?
A: 30% deposit in advance, the JCPT payment from the duplicate of Monthly bill of lading. Of training course, I feel almost everything is negotiable.

Q: What about your supply time?
A: About 45 times for typical orders. But it is dependent on the purchase quantity. Of program, if you have an urgent order, we will consider ideal to satisfy you.

Our Team                    

Stainless Steel Jic Tube Fittings Bulkhead Lock Nut Fittings