Surgical Orthopedic Instruments for Small Locking Fragment Plate, Small Fragmnet Instrument with Ce, ISO and FDA

Surgical Orthopedic Instruments for Small Locking Fragment Plate, Small Fragmnet Instrument with Ce, ISO and FDA

The locking screw principle was developed by Dr. Tepic S and Dr. Perren SM for the first time in 1995. With locking compression plate put in use, it turned one particular of the most essential developments for plate and screw interior fixation in current many years. Locking screws supply the capacity to generate a mounted-angle build whilst employing acquainted typical plating methods. The set-angle assemble perform like a interior fixators which sustain principal and secondary decline of reduction. This variety construct also supplies enhanced fixation in osteopenic bone or multifragment fractures in which traditional screw obtain is compromised. constructs do not relγ on plate-to-bone compression to sustain stability. For that reason, the periosteum will be guarded and the blood offer to the bone preserved. 

Item Title JCPT devices Surgical Devices for Modest Locking Fragment Plate
Content The CanSLP are manufactured of stainless metal
Coloration JCPT
Standard  ISO 13485,ISO9001,QSR820,CE
Functions & Advantages *The Combi-holes allow placement of typical cortex and cancellous bone screw on one facet or threaded locking screw on the opposite side of every single gap.

*Periarticular Plates are pre-contoured to generate an anatomical fit that requires minor or no extra bending that minimizes impinging on gentle tissues.

*Locking screw with stardrive recess

*Locking screw with self-tapping flutes

*The huge core diameter boost bending and shears toughness of the screw, distribute the load above a huge area in the bone.

*Specific double guide thread beneath the screw head engages and locks into the threaded holes of the plate

Indication The method applies to many various plate types and is therefore appropriate for a massive quantity of fracture kinds.
*Malunions, nonunions
*Osteotomies
*Fractures

 Instrument Set Record

P.N Description Qty.
112100001 Depth Gauge for φ2.5mm-φ4. 0mm Length 60mm 1
112100002 Plate Bender, left Length 190mm 1
112100003 Plate Bender, right Length 190mm one
112100004 LC-DCP Drill Xihu (West Lake) Dis., Ø2.five/Ø3.5mm 1
112100005 Double Drill Sleeve I, Ø2.5/Ø3.5mm one
112100008 Bending Template, large Length 118mm Width 10mm 1
112100009 Bending Template, small Length 92mm Width 10mm 1
112100014 Countersink Length 100mm one
112100015 Drill Bit, Ø3.5mm Length 112mm Thread Length 60mm 1
112100016 Drill Bit, Ø2.5mm Length 112mm Thread Length 30mm two
112100017 Hexagonal JCPTdriver Shaft one
112100018 Tap for Cortex JCPT φ3.5mm Length 112mm Thread Length 30mm one
112100019 Tap for Cancellous Bone JCPT φ4.0mm Thread Length 20mm 1
11210571 Universal Drill Xihu (West Lake) Dis. II, Ø3.five/two.5mm one
112100571 Hexagonal JCPTdriver with Holding Sleeve, Length 200mm one
112100571 T-handle with Quick Coupling Length 90mm one
112200001 Torque Limiter 1.5N Length 220mm one
112200002 φ2.8Threaded Drill Sleeve for φ3.5mm 2
112200003 Stardrive JCPTdriver Shaft, Length 120mm one
112200004 φ2.8Drill Bit Length 165mm Thread Length 40mm 2
112200005 Easyout Length 80mm one
112200009 JCPT Driver Length 200mm 1
11220571 Bender for K-Wire 1
112127000 JCPT Tray one
112128000 Instrument Tray one

Q: Would you you should give some data on shipping method and fees? 
A: Normally we ship via courier, or put up upon ask for from clients.

Q: Do you have ISO 9001, CE, or Food and drug administration approvals? 

 A: Indeed, we are an ISO 9001:2008 and EN ISO 13485:2012 Qualified Company. We have Fda Registrations and CE mark for numerous of our products.

Q: What is the minimum order that we can spot? 
A: We count on your least orders to be minimum at US$1000. Nevertheless, we recognize that   JCPTers need to location smaller sized samples orders in the commencing in get to check market our merchandise . Samples in opposition to value are offered on ask for.

Q: Can I purchase merchandise not demonstrated but comparable to your catalogue?
A: Of training course you can, just deliver us pictures or samples. But this takes a minor longer time for delivery.

Q: Do you have inventory for detailed items, or they are recently developed?
A: Typically, we have stock for every single listed products, which ended up created month to month. But it relies upon on our sales condition. JCPTer to ask our salesman for exact stock details.

 

 
 

Surgical Orthopedic Instruments for Small Locking Fragment Plate, Small Fragmnet Instrument with Ce, ISO and FDA

Tags: